3 Channels Blasting Vibration Meter Logger Vibration Monitor with 3-Axial Sensor

Description

3 Channels Blasting Vibration Meter Logger Vibration Monitor with 3-Axial Sensor
Introduction:
Blasting Vibration Monitor satisfies all the needs of blasting vibration recording happened in the engineering projects of construction, mining, bridge, tunnel, roads and so on.
Consultants equipped it as a must for blasting affection estimation as well as people works in the seismic institutes or related universities.
Applications:
Blast-monitoring for compliance
Near-field blast Analysis
Construction Activity
Demolition Activity
Bridge Monitoring
Structural Analysis
Underwater blast monitoring
Features:
1. Easy To Use
Embedded computer system and backlit LCD make onsite setup and operation quick, easy and intuitive, even for inexperienced personnel. It also supports quick view afterwards.
2. Triaxial Velocity
All 3 speed sensors in one makes cable setting easy.
3. High-A/D Resolution
A/D resolution reaches to 24 bit, which makes waveform smooth and precise.
4. Wide Range
Specially designed range from 0.001cm/s to 35.4cm/s covers all the possibilities of
blast vibration recording. Manual operation is not necessary, it adjust automatically.
5. Large Storage
The number of events can be continually recorded is 128 to 57,000. Equals to
128G.
General Specifications
：
Channels: Triaxial Geophone or 3 independent user-configurale channels
User Interface
: 9-key keypad and high-contrast, backlit LCD
Battery: Rechargeable 5 V~12V lithium cell
Sample Rate: 1kHz to 100kHz adjustable
A/D: 24 Bit
Frequency Range: 0Hz ~ 20 kHz
Resolution: 0.05mV (0.5mm/s)
Accuracy: 1%
Clock precision: ≤5s per month
Waveform Recording:
Sample Mode: Simultaneous Acquisition
Record Time
: 1
～
5000 seconds, optional
Record Mode
: Event is recorded until activity remains below trigger level for duration of auto mode,
or until available memory is filled.
Range: Auto Range. Up to 350 mm/s
Trigger level: 0-10V(0-35cm/s) adjustable
Storage Capacity: Max 57,000 events
,
equals to 128G
Physical Specifications:
Dimensions: 185mm × 120mm × 80mm
Weight: 1.8kg
PC Interface: USB 2.0
Battery life
: Capacity for 60 hours of continuous monitoring
Environmental
: Operating Temp. Range: -10
℃ ～
75
℃
Relative Humidity: 20
～
100
％
RH Noncondensing
Remote Communications
:
Compatible with GSM, RF and Cellular servers
Warranty
:
2 years
Packing List:
1 blasting vibration meter
1 three-way speed sensor
1 signal acquisition line.
1 multifunctional data cable
1 lithium battery charger
1 USB flash drive for software installation
1
instruction manual
1
certificate of quality assurance card
1
special instrument box