3 Channels Vibration Tester Meter Vibrometer Analyzer Bearing Condition Monitor

Description

3 Channels Vibration Tester Meter Vibrometer Analyzer Bearing Condition Monitor
Note: Battery cannot be included during the shipping !!!
Introduction:
Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
Features:
3 same parameters in one display for 3 position measurement or 1 position measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.
In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
Individual high quality celerometer for accurate and repeatable measurements.
Wide frequency range (10Hz~10kHz) in acceleration mode.
Optional headphones for use as electronic stethoscope.
Bearing condition monitoring function.
Use USB/RS-232 data output to connect with PC.
(Optional)
Provide Bluetooth data output choice.
(Optional)
Specification:
Sensor
3 Piezoelectric Transducers
Measuring Range
Acceleration
0.1m/s²~400m/s² 0.3ft/s²~1312ft/s² 0.0g~40g Equivalent Peak
Velocity
0.01mm/s~400mm/s 0.004inch/s~16.0inch/s True RMS
Displacement
0.001mm~4.0 mm 0.04mil~160.0 mil Equivalent Peak-peak
Frequency Range
Acceleration
10Hz~10kHz
Velocity
10Hz~1kHz
Displacement
10Hz~1kHz
Accuracy
5% of Reading+2 digits
Operating Conditions
Temperature
0ºC~50ºC
Humidity
<90%RH
Power Supply
4x1.5V AAA(UM-4)Battery
(not included)
Dimensions
140mmx73mmx35mm
Weight
415g(Not Including Batteries)
Standard Accessories
Main Unit
Piezoelectric Transducers
Powerful Rare Earth Magnet
Probe(Cone)&Probe(Spherical)
Carrying Case(B04)
Manual Book
Optional Accessories
Headset
RS-232C Data Cable with Software
Bluetooth Data Adapter with Software