EG&G Ametek Rotron SL SPIRAL Duplex Regenerative Blower SL2EA52F New

Description

All items are sold as is without warranty unless specifically stated in the posting.
This does not mean that the unit doesn’t work, only that we have not tested or checked it out.
This may also mean that we are not knowledgeable in this specific item.
The Item may vary from picture as manufacture may change model appearance.
EG&G Ametek Rotron SL SPIRAL Duplex Regenerative Blower SL2EA52F New
comes with what you see in the pictures. If you don't see it, you probably won’t get it.
Specifications are from manufacturer and may vary slightly due to upgrades, options, or revisions this unit may or may not have. eBay’s description of “USED or FOR PARTS OR NOT WORKING” and our description of “USED or FOR PARTS OR NOT WORKING” is different, therefore because eBay requires the filling in of this field, we state as “USED or FOR PARTS OR NOT WORKING” PLEASE READ OUR “CONDITION” for our description of “USED or FOR PARTS OR NOT WORKING”
Model Number:
SL2EA52F
Catalog Number:
A0-027232
Serial Number:
U28284
Electrical Requirements:
208 - 230 Volts, 50/60 Hz, 1.6 Amps
Condition:
New
General Description:
AMETEK ROTRON® lines of regenerative blowers are designed based on the regenerative principle. The impeller blades passing the inlet port of the blower draw air or other gasses into the blower. The impeller blades then, by centrifugal action, accelerate the air outward and forward. Here the “regenerative” principle takes effect as the air is turned back by the annular shaped housing to the base of the following blades where it is again hurled outward. Each “regeneration” imparts more pressure to the air. When the air reaches the stripper section at the outlet (the stripper is the part of the blower located between the inlet and the outlet in which the annulus is reduced in size to fit closely to the sides and tips of the impeller blades) the air is “stripped” from the impeller and diverted out of the blower. The pressures or vacuums generated by the one or two spinning, non-contacting, oil-free impellers are equal to those obtained by many larger multi-stage or positive displacement blowers.
Features:
Manufactured in the USA - ISO 9001 and NAFTA compliant
CE compliant - Declaration of Conformity on file
Maximum Flow:
65 SCFM
Maximum Pressure:
60 IWG
Maximum Vacuum:
55.8 IWG
Standard Motor:
0.75 HP, ODP
Cast aluminum blower housing, impeller & cover; slip-on flanges
Motor with permanently sealed ball bearings
Inlet and outlet internal muffling
Quiet operation within OSHA standards
Thermal overload protected
Specifications:
Maximum Pressure:
2.2 PSI
Starting Capacitor Required:
25 MFD, 370 Volts (Not Included)
Maximum Flow Rate:
65ft³/min
The charge for freight
will
be determined by the destination upon the ending of the auction. There
will
be a packing fee on larger and heavier items it
will
be determined by the size and the care that has to go into packing an item. Most of the time, people are impressed with the job we do because we customize our own skids for larger items and we take the utmost care to provide a safe and cozy journey for your item. We strive to make our customers happy and want you to feel that we have treated you with the ultimate respect.
Disclaimer:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
MHz Electronics Inc.
2801 East Washington Street
Phoenix, AZ 85034
9-18-2013 BF
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.