Fluke 805 Vibration Meter mechanical troubleshooting and maintenance F805

Description

Description
Fluke 805 Vibration Meter mechanical troubleshooting and maintenance F805
Introduction:
Features and Benefits
Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure
Consistent data quality at both low and high frequency ranges
Four-level scale indicates severity of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft® Excel using built-in templates
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities
On-board memory holds up to 3,500 measurements
Audio output for listening to bearing tones directly
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Large screen with high resolution for easy navigation and viewing
Use the 805 to check the following machine categories:
Chillers (refrigeration)
Fans
Cooling tower drives
Centrifugal pumps
Positive displacement pumps
Air compressors
Blowers
Generic gearboxes (rolling element bearings)
Machine tools (motor, gearboxes, spindles, etc.)
Vibration Meter
Low Frequency Range (Overall Measurement)
10 Hz to 1,000 Hz
High Frequency Range (CF+ Measurement)
4,000 Hz to 20,000 Hz
Severity Levels
Good, satisfactory, unsatisfactory, unacceptable
Vibration Limit
50 g peak (100 g peak-peak)
A/D Converter
16-bit
Signal To Noise Ratio
80 dB
Sampling Rate
Low frequency
20,000 Hz
High frequency
80,000 Hz
Real Time Clock Backup
Coin battery
Sensor
Sensitivity
100 mV g ± 10%
Measurement Range
0.01 g to 50 g
Low Frequency Range (Overall Measurement)
10 Hz to 1,000 Hz
High Frequency Range
4,000 Hz to 20,000 Hz
Resolution
0.01 g
Accuracy
At 100 Hz ± 5% of measured value
Amplitude Units
Acceleration
g, m/sec²
Velocity
in/sec, mm/sec
Displacement
mils, mm
Infrared Thermometer (Temperature Measurement)
Range
-20 °C to 200 °C (-4 °F to 392 °F)
Accuracy
±2 °C (4 °F)
Focal Length
Fixed, at ~3.8 cm (1.5")
External Sensor
Note: Fluke supports but does not provide external sensors
Frequency Range
10 Hz to 1,000 Hz
Bias Voltage (To Supply Power)
20 V dc to 22 V dc
Bias current (To Supply Power)
Notice: Because,the international air shipping forbid to ship liquid,powder and batteries, If you purchased goods containing such items, we will not be putting them packing. Thank you for your support.
Payment
We currently only accept payment through PayPal.
Payment must be made within 12 days after the auction/bid ends, or eBay will open Unpaid Item case automatically later.
Shipping
Please read this before buying International Shipping may Be Delayed Due to Customs. Customers are Responsible For All Import Charges, Tariffs, Duties, Taxes, and Fees Associated with Import of the product. Shipping Charges does not include any Import Charges, Tariffs, Duties, Taxes, and Fees Associated with it. We are not responsible for undeliverable address.
We reserve the right to charge the shipping fee again for returned items due to wrong address.
Items are generally shipped out the 1-5 business day after your payment has been cleared (Sat. & Sun. excluded.)
Orders from the United States will all be shipped out via epacket. The shipment usually takes 10-14 days, if you need the item urgently, please contact us for detail before purchase.
Customers from other country, if your order passed 30 USD , your package with be shipped with tracking service for free ,if less than 30 USD, your order will be shipped without tracking number by China Post. The shipment usually takes 20-30 days.if you need the item urgently, please contact us for detail before purchase
Terms of Sale
Dear friend, your happy is very important to me!.we stand behind every product we sell.Your bid is a contract - Place a bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally biding contract to purchase the item. If payment is not received within 7 days, item may be offered to the next highest bidder or relisted at the seller's sole discretion.If you're not pleased with your purchase, we'll be happy to make an exchange or refund the product price less S&H within 7 days of your purchase. For any exchange or refund, we need the original receipt or a record of the purchase in our system, and the product must be in its original condition, including the box, packaging, and all accessories.Shipping and handling charges are not refundable.
About Us
We are professional EBAY sales team and lots of ebay buyers very satisfied with our services.You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here.
Contact Us
Please contact us with any comments, questions or suggestions that you may have bysending ebay message, All the mail will be replied within 24 hours. Please ensure your mail box would not blocked / filtered our mails.we will be happy to assist you.please feel free to contact us for WHOLESALES deal,we will surely give you a satisfatory price.We would try our best to serve you with any question / problem. Please contact us first before leaving Negative / Neutral Feedback or open any cases.We work 6 Days a week From 9:00am - 6:00pm Monday - Saturday CHINA Time.