-40%
Moog Crossbow CXL10HF3 +/-10g 3-Axis Accelerometer Module S/N: 9916119
$ 235.61
- Description
- Size Guide
Description
Crossbow CXL10HF3 +/-10g 3-Axis Accelerometer Module S/N: 9916819Dimenions: 1.5" X 1" X .75" "
Cable: 92" gold 7-pin female mini serial
Crossbow CXL10HF3 10g Module Accelerometer Vibration Sensor Model: CXL10HF3 10g S/N: 9916119 0.3-10,000Hz 3-Axis Low noise, wide bandwidth Constant current or constant voltage excitation Input Rating: +-10 Sensitivity: +-100 Transverse Sensitivity (% FS): 5 Non-Linearity (% of FS): 1 Start Up Time (sec): 2.5
The HF Series accelerometers are precision vibration sensors based on an advanced piezoelectric material integrated with signal conditioning (charge amp) and current regulation electronics. The sensor features low noise, 300grms, and wide band-width, 0.3 -10,000 Hz. The sensors electronics are uniquely designed to be compatible with both current loop systems and voltage mode systems. Unlike the other accelerometer series, the HF Series does not have a DC response, which means the unit will not respond to gravity or other very low frequency (<0.3 Hz) signals.
The sensor is an excellent choice for vibration monitoring of all kinds: vehicle and engine testing, shock recording, predictive maintenance, industrial vibration monitoring, acoustic and high frequency measurements.
The sensor can be powered by a current source using the signal wire and ground. If powered by a current source, the signal wire is used as both the excitation signal and the sensor signal. A constant current of 0.3-20 mA is provided by either a current source such as a battery box, signal conditioner, or analyzer instrument with current source I/O capability. This interface allows the sensor backward compatibility with many older systems.
Unit has NOT been tested.
Used condition. See photos for details.
XXQXX10
Powered by SixBit's eCommerce Solution